HP ProCurve 2510-24 User Manual

6-1
6
Switch Memory and Configuration
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Overview of Configuration File Management . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Using the CLI To Implement Configuration Changes . . . . . . . . . . . . . . . . . 6-5
Using the Menu and Web Browser Interfaces To Implement
Configuration Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Configuration Changes Using the Menu Interface . . . . . . . . . . . . . . . . 6-8
Using Save and Cancel in the Menu Interface . . . . . . . . . . . . . . . . 6-9
Rebooting from the Menu Interface . . . . . . . . . . . . . . . . . . . . . . . 6-10
Configuration Changes Using the Web Browser Interface . . . . . . . . 6-11
Using Primary and Secondary Flash Image Options . . . . . . . . . . . . . . . . . 6-12
Displaying the Current Flash Image Data . . . . . . . . . . . . . . . . . . . . . . 6-12
Switch Software Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Local Switch Software Replacement and Removal . . . . . . . . . . . . . . 6-15
Rebooting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17
Booting from the Current Software Version . . . . . . . . . . . . . . . . . 6-19
Operating Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21

HP ProCurve 2510-24 Specifications

General

Model	HP ProCurve 2510-24
Switching Capacity	8.8 Gbps
Layer	Layer 2
Form Factor	Rack-mountable
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Power	AC 120/230 V (50/60 Hz)
Management	Web, SNMP, CLI
Features	VLAN support, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0 to 40 °C
Operating Humidity	15% to 95% (non-condensing)
Dimensions	44.25 x 17.3 x 4.45 cm