HP ProCurve 2510-24 User Manual

E-1
E
Daylight Savings Time on ProCurve Switches
Configuring Daylight Savings Time
This information applies to the following ProCurve switches:
ProCurve switches provide a way to automatically adjust the system clock for
Daylight Savings Time (DST) changes. To use this feature you define the
month and date to begin and to end the change from standard time. In addition
to the value "none" (no time changes), there are five pre-defined settings,
named:
■ Alaska
■ Canada and Continental US
■ Middle Europe and Portugal
■ Southern Hemisphere
■ Western Europe
The pre-defined settings follow these rules:
Alaska:
• Begin DST at 2am on the second Sunday in March.
• End DST at 2am on the first Sunday in November.
• 2510
• 2512
• 2524
• 2626
• 2650
• 2626-PWR
• 2650-PWR
• 2810
• 2510
• 2824
• 2848
• 3400cl
• 4108gl
• 4104gl
• 6108
• 5304xl
• 5308xl
• 1600M
• 2400M
• 2424M
• 4000M
• 8000M
• 212M
• 224M
• ProCurve
AdvanceStack
Switches
• ProCurve
AdvanceStack Routers

HP ProCurve 2510-24 Specifications

General

Model	HP ProCurve 2510-24
Switching Capacity	8.8 Gbps
Layer	Layer 2
Form Factor	Rack-mountable
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Power	AC 120/230 V (50/60 Hz)
Management	Web, SNMP, CLI
Features	VLAN support, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0 to 40 °C
Operating Humidity	15% to 95% (non-condensing)
Dimensions	44.25 x 17.3 x 4.45 cm