HP ProCurve 2510-24 User Manual

7-13
Interface Access and System Information
System Information
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter], then press
[S] (for Save) and return to the Main Menu.
CLI: Viewing and Configuring System Information
System Information Commands Used in This Section
Listing the Current System Information. This command lists the current
system information settings.
Syntax: show system-information
This example shows the switch’s default console configuration.
Figure 7-7. Example of CLI System Information Listing
show system-information below
hostname below
snmp-server
[contact] [location]
below
mac-age-time page 7-15
time
time zone page 7-15
daylight-time-rule page 7-15
date
time
page 7-15

HP ProCurve 2510-24 Specifications

General

Model	HP ProCurve 2510-24
Switching Capacity	8.8 Gbps
Layer	Layer 2
Form Factor	Rack-mountable
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Power	AC 120/230 V (50/60 Hz)
Management	Web, SNMP, CLI
Features	VLAN support, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0 to 40 °C
Operating Humidity	15% to 95% (non-condensing)
Dimensions	44.25 x 17.3 x 4.45 cm