HP ProCurve 2510-24 User Manual

12-24
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Advanced Management: RMON
The switches covered in this guide support RMON (Remote Monitoring) on
all connected network segments. This allows for troubleshooting and
optimizing your network. The following RMON groups are supported:
■ Ethernet Statistics (except the numbers of packets of different frame
sizes)
■ Alarm
■ History (of the supported Ethernet statistics)
■ Event
The RMON agent automatically runs in the switch. Use the RMON
management station on your network to enable or disable specific RMON
traps and events.

HP ProCurve 2510-24 Specifications

General

Model	HP ProCurve 2510-24
Switching Capacity	8.8 Gbps
Layer	Layer 2
Form Factor	Rack-mountable
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Power	AC 120/230 V (50/60 Hz)
Management	Web, SNMP, CLI
Features	VLAN support, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0 to 40 °C
Operating Humidity	15% to 95% (non-condensing)
Dimensions	44.25 x 17.3 x 4.45 cm