To Next Page

To Previous Page

D-2

MAC Address Management

Overview

The switch assigns MAC addresses in these areas:

■ For management functions:

• One Base MAC address assigned to the default VLAN (VID = 1)

• Additional MAC address(es) corresponding to additional VLANs you

configure in the switch

■ For internal switch operations: One MAC address per port (See “CLI:

Viewing the Port and VLAN MAC Addresses” on page D-4.)

MAC addresses are assigned at the factory. The switch automatically

implements these addresses for VLANs and ports as they are added to the

switch.

Note The switch’s base MAC address is also printed on a label affixed to the back

of the switch.

Determining MAC Addresses in the

Switch

MAC Address Viewing Methods

■ Use the menu interface to view the switch’s base MAC address and the

MAC address assigned to any non-default VLAN you have configured on

the switch.

Note The switch’s base MAC address is used for the default VLAN (VID = 1) that is

always available on the switch.

Feature Default Menu CLI Web

view switch’s base (default vlan) MAC address

and the addressing for any added VLANs

n/a D-3 D-4 —

view port MAC addresses (hexadecimal format) n/a — D-4 —

Other manuals for HP ProCurve 2510-24

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510-24 and is the answer not in the manual?

General