HP ProCurve 2510-24 User Manual

7-9
Interface Access and System Information
Interface Access: Console/Serial Link, Web, and Telnet
none
When invoked in a console session, changes the terminal mode to
“raw” (scripting mode) for that console session. (Scripting mode
eliminates unwanted control characters that may appear in some
scripting languages.) Use this option when the configured
terminal mode is either vt100 or ansi, and you want to temporarily
use the scripting mode.
ansi
When invoked in a console session, changes the terminal mode to
ANSI for that console session. Use this option when the configured
terminal mode is either vt100 (scripting mode) or none, and you
want to temporarily use the ANSI mode.

HP ProCurve 2510-24 Specifications

General

Model	HP ProCurve 2510-24
Switching Capacity	8.8 Gbps
Layer	Layer 2
Form Factor	Rack-mountable
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Power	AC 120/230 V (50/60 Hz)
Management	Web, SNMP, CLI
Features	VLAN support, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0 to 40 °C
Operating Humidity	15% to 95% (non-condensing)
Dimensions	44.25 x 17.3 x 4.45 cm