To Next Page

To Previous Page

B-12

Monitoring and Analyzing Switch Operation

Status and Counters Data

CLI Access To Port and Trunk Group Statistics

To Display the Port Counter Summary Report. This command provides

an overview of port activity for all ports on the switch.

Syntax: show interfaces

To Display a Detailed Traffic Summary for Specific Ports. This com-

mand provides traffic details for the port(s) you specify.

Syntax: show interfaces [ethernet] < port-list >

To Reset the Port Counters for a Specific Port. This command resets

the counters for the specified ports to zero for the current session. (See the

“Note on Reset” on page B-10.)

Syntax: clear statistics < [ethernet] port-list >

Web Browser Access To View Port and Trunk Group

Statistics

1. Click on the Status tab.

2. Click on Port Counters.

3. To refresh the counters for a specific port, click anywhere in the row for

that port, then click on Refresh.

Note To reset the port counters to zero, you must reboot the switch.

Other manuals for HP ProCurve 2510-24

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510-24 and is the answer not in the manual?

General