C-40
Troubleshooting
Diagnostic Tools
Listing Switch Configuration and Operation Details for Help
in Troubleshooting
The show tech command outputs, in a single listing, switch operating and
running configuration details from several internal switch sources, including:
■ Image stamp (software version data)
■ Running configuration
■ Event Log listing
■ Boot History
■ Port settings
■ Status and counters — port status
■ IP routes
■ Status and counters — VLAN information
■ GVRP support
■ Load balancing (trunk and LACP)
■ Stacking status — this switch
■ Stacking status — all
Syntax: show tech
Executing show tech outputs a data listing to your terminal emulator. How-
ever, using your terminal emulator’s text capture features, you can also save
show tech data to a text file for viewing, printing, or sending to an associate.
For example, if your terminal emulator is the Hyperterminal application
available with Microsoft
®
Windows
®
software, you can copy the show tech
output to a file and then use either Microsoft Word or Notepad to display the
data. (In this case, Microsoft Word provides the data in an easier-to-read
format.)
To Copy show tech output to a Text File. This example uses the
Microsoft Windows terminal emulator. To use another terminal emulator
application, refer to the documentation provided with that application.
To Next Page
Loading...
Need help?
General
