HP ProCurve 6120G/XG

Web and MAC Authentication
Configuring Web Authentication
ProCurve (config)# show port-access web-based clients 1 detailed
Port Access Web-Based Client Status Detailed
Client Base Details :
Port : 1
Session Status : authenticated Session Time(sec) : 6
Username : webuser1 MAC Address : 0010b5-891a9e
IP : n/a
Access Policy Details :
COS Map : 11111111 In Limit % : 98
Untagged VLAN : 4006 Out Limit % : 100
Tagged VLANs : 1, 3, 5, 6, 334, 2566
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 3-10. Example of show port-access web-based clients detailed Command Output
Syntax: show port-access web-based clients <port-list> detailed
Displays detailed information on the status of web-
authenticated client sessions on specified switch ports.
3-30