5-17
Configuring IP Addressing, Interface Access, and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
Configuring IP Addressing,
Interface Access, and
Menu: Modifying the Interface Access
The menu interface enables you to modify these parameters:
â– Inactivity Timeout
â– Inbound Telnet Enabled
â– Web Agent Enabled
To Access the Interface Access Parameters:
1. From the Main Menu, Select...
2. Switch Configuration...
1. System Information
Figure 5-4. The Default Interface Access Parameters Available in the Menu
Interface
2. Press [E] (for E
dit). The cursor moves to the System Name field.
3. Use the arrow keys ([v], [^], [<], [>]) to move to the parameters you want
to change.
Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter], then press [S] (for S
ave).
Interface Access
Parameters
To Next Page
Loading...
Need help?
General