11-19
Troubleshooting
Diagnostic Tools
Troubleshooting
CLI Administrative and Troubleshooting Commands
These commands provide information or perform actions that you may find
helpful in troubleshooting operating problems with the switch.
Note For more on the CLI, refer to chapter 3, "Using the Command Line Reference
(CLI).
Syntax: show version Shows the software version
currently running on the switch.
show boot-history Displays the switch shutdown
history.
show history Displays the current command
history.
[no] page Toggles the paging mode for
display commands between
continuous listing and per-page
listing.
Setup Displays the Switch Setup screen
from the menu interface
Repeat Repeatedly executes the previous
command until a key is pressed.
kill Terminates all other active
sessions.
To Next Page
Loading...
Need help?
General