9-35
Configuring Advanced Features
HP ProCurve Stack Management
Configuring Advanced
Features
Viewing the Status of all Stack-Enabled Switches Discovered in the IP
Subnet. The next example lists all the stack-configured switches discovered
in the IP subnet. Because the Switch 2524 on which the show stack all
command was executed is a candidate, it is included in the “Others” category.
Syntax: show stack all
Figure 9-24. Result of Using the Show Stack All Command To List Discovered
Switches in the IP Subnet
Viewing the Status of the Commander and Current Members of the
Commander’s Stack. The next example lists all switches in the stack of the
selected switch.
Syntax: show stack view
Figure 9-25. Example of the Show Stack View Command To List the Stack Assigned
to the Selected Commander
To Next Page
Loading...
Need help?
General