9-87
Configuring Advanced Features
GVRP
Configuring Advanced
Features
Enabling and Disabling GVRP on the Switch. This command enables
GVRP on the switch.
Syntax: gvrp
This example enables GVRP:
HP2512(config)# gvrp
This example disables GVRP operation on the switch:
HP2512(config)# no gvrp
Enabling and Disabling GVRP On Individual Ports. When GVRP is
enabled on the switch, use the unknown-vlans command to change the
Unknown VLAN field for one or more ports. You can use this command at
either the Manager level or the interface context level for the desired port(s).
Syntax: show gvrp Shows the current settings.
interface <port-list> unknown-vlans
<learn | block | disable> Changes the Unknown VLAN
field setting for the specified
port(s).
For example, to view and change the configuration for ports 1-2 to Block:
HP2512(config)# interface 1-2 unknown-vlans block
To Next Page
Loading...
Need help?
General