3-14
Using the Command Line Interface (CLI)
Using the CLI
Using the Command Line
Interface (CLI)
Figure 3-10. Context-Specific Commands Affecting Port Context
HP2512(eth-5-8)# ?
HP2512(eth-5-8)# ?
Lists the commands you can
use in the port or static trunk
context, plus the Manager,
Operator, and context
commands you can execute
at this level.
The remaining commands in the listing are
Manager, Operator, and context commands.
In the port context, the first block of commands in the "?"
listing show the context-specific commands that will affect
only ports 5-8.
To Next Page
Loading...
