158 HP ProLiant DL580 Generation 3 Server User Guide
POST problems flowchart
Symptoms:
• Server does not complete POST
NOTE: The server has completed POST when the system
attempts to access the boot device.
• Server completes POST with errors
Possible Problems:
• Improperly seated or faulty internal component
• Faulty KVM device
• Faulty video device
Item Refer to
1 "POST error messages ("POST error messages and beep codes" on
page 166
)"
2 "Video problems
3 KVM or RILOE documentation
4 "Loose connections (on page 149)"
5 Server maintenance and service guide, located on the Documentation
CD or the HP website (http://www.hp.com/products/servers/platforms
)
6 Server user guide or setup and installation guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 • "Hardware problems"
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
To Next Page
Loading...
