EasyManua.ls Logo

HP ProLiant DL580 Generation 3 - Server Fault Indications Flowchart

HP ProLiant DL580 Generation 3
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting 163
Server fault indications flowchart
Symptoms:
Server boots, but a fault event is reported by Insight Management agents (on
page 134
)
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer to
1 "Management agents (on page 134)"
2 • "Integrated Management Log (on page 137)"
"Event List Error Messages"
3 Server user guide or setup and installation guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
4 System Management Homepage at https://localhost:2381
(https://localhost:2381
)
5 "Power-on problems ("Power-on problems flowchart" on page 155)"
6 • "Hard drive problems"
Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 "HP Insight Diagnostics (on page 136)"

Table of Contents

Related product manuals