38 HP ProLiant DL580 Generation 3 Server User Guide
Extending the server from the rack
The design of the server enables you to access several components through the
front of the server. Installing or accessing the following components will not
require extending the server from the rack:
• Processors
• Memory boards
• DIMMs
• DVD drive
• Diskette drive
• Hard drives
To extend the server from the rack:
1. Release the two levers on the lower outside corners of the rack.
NOTE: If the server is in a rack and in the shipping configuration,
remove the two shipping screws directly behind the levers.
IMPORTANT: If the server is installed in a telco rack, remove the
server from the rack to access internal components.
To Next Page
Loading...
