HP Smart Array errors 119
• “The Smart Array firmware is reporting that the redundant cabling
configuration on the controller has a mix of storage boxes with and without
redundant I/O modules”
• “The Smart Array firmware is reporting that a redundant I/O paths exist due
to direct loopback of the controller ports”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box are not cabled for good fault tolerance”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box have multiple paths to the controller”
Message Id: 24617
Severity: Warning
Log message: Array controller <controller name / slot information> is reporting that
an unsupported configuration has occurred with the redundant cabling that is
attached to port <port number>. <firmware information>. Please check the cabling
and ensure that a supported configuration is being used.
<firmware information> values:
• “The Smart Array firmware is reporting that no additional details are
available”
• “The Smart Array firmware is reporting that the redundant cabling
configuration on the controller has a mix of storage boxes with and without
redundant I/O modules”
• “The Smart Array firmware is reporting that a redundant I/O paths exist due
to direct loopback of the controller ports”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box are not cabled for good fault tolerance”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box have multiple paths to the controller”
Message Id: 24618
Severity: Warning
Log message: Array controller <controller name / slot information> is reporting that
an unsupported configuration has occurred with the redundant cabling that is
attached to port <port number>. Please check the cabling and ensure that a
supported configuration is being used.
Message Id: 24619
Severity: Informational
Log message: Fan number <fan number> in box <box number> was <inserted / removed>.
Box <box number> is attached to port <port number> of array controller <controller
name / slot information>.
Message Id: 24620
Severity: Informational
To Next Page
Loading...
