HP ProLiant Gen9 - Page 319

Microsoft Windows Event ID and SNMP traps 319
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqDaCntlrHwLocation
• cpqDaPhyDrvIndex
• cpqDaPhyDrvBusNumber
• cpqDaPhyDrvBay
• cpqDaPhyDrvModel
• cpqDaPhyDrvFWRev
• cpqDaPhyDrvSerialNum
• cpqDaPhyDrvFailureCode
• cpqDaPhyDrvStatus
Supporting SNMP Trap Description: “Physical Drive Status is now [cpqDaPhyDrvStatus].”
NT Event ID: 1203 (Hex)0x843504b3 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Drive Array Physical Drive Threshold Exceeded.
Log Message: The physical drive in %4, port %5, bay %6 with serial number “%7”, has exceeded a drive
threshold.
SNMP Trap: cpqDa6PhyDrvThreshPassedTrap - 3037 in CPQIDA.MIB
Symptom: Physical Drive Threshold Passed. This trap indicates that the agent has detected a factory threshold
associated with one of the physical drive objects on a drive array has been exceeded.
User Action: Replace the physical drive.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqDaCntlrHwLocation
• cpqDaPhyDrvCntlrIndex
• cpqDaPhyDrvIndex
• cpqDaPhyDrvBusNumber
• cpqDaPhyDrvBay
• cpqDaPhyDrvModel
• cpqDaPhyDrvFWRev
• cpqDaPhyDrvSerialNum
Supporting SNMP Trap Description: “Factory threshold passed for a physical drive.”
NT Event ID: 1204 (Hex)0x843504b4 (cpqstmsg.dll)
Log Severity: Warning (2)