HP ProLiant Gen9 - Page 320

To Next Page

To Previous Page

Microsoft Windows Event ID and SNMP traps 320

Event Title: Drive Array Accelerator Status Change.

Log Message: The array accelerator board attached to the array controller in %4 has a new status of %2.

SNMP Trap: cpqDa6AccelStatusChange - 3038 in CPQIDA.MIB

Symptom: Accelerator Board Status Change. This trap indicates that the agent has detected a change in the

status of an array accelerator cache board. The current status is represented by the variable

cpqDaAccelStatus.

User Action: If the accelerator board status is permDisabled(5), you may need to replace the accelerator

board.

Supporting SNMP Trap Data:

• sysName

• cpqHoTrapFlags

• cpqDaCntlrHwLocation

• cpqDaCntlrModel

• cpqDaAccelCntlrIndex

• cpqDaAccelSerialNumber

• cpqDaAccelTotalMemory

• cpqDaAccelStatus

• cpqDaAccelErrCode

Supporting SNMP Trap Description: “Status is now [cpqDaAccelStatus].”

NT Event ID: 1205 (Hex)0x843504b5 (cpqstmsg.dll)

Log Severity: Warning (2)

Event Title: Drive Array Accelerator Bad Data.

Log Message: The array accelerator board attached to the array controller in %4 is reporting that it contains

bad cached data.

SNMP Trap: cpqDa6AccelBadDataTrap - 3039 in CPQIDA.MIB

Symptom: Accelerator Board Bad Data. This trap indicates that the agent has detected an array accelerator

cache board that has lost battery power. If data was being stored in the accelerator cache memory when the

server lost power, that data has been lost.

User Action: Verify that no data has been lost.