HP ProLiant Gen9 - Page 398

To Next Page

To Previous Page

Microsoft Windows Event ID and SNMP traps 398

• cpqNicIfPhysAdapterStatus

• cpqSePciSlotBoardName

• cpqNicIfPhysAdapterPartNumber

• ipAdEntAddr

• cpqNicIfLogMapIPV6Address

• cpqNicIfLogMapAdapterOKCount

Supporting SNMP Trap Description: “Redundancy increased by adapter in slot [cpqNicIfPhysAdapterSlot],

port [cpqNicIfPhysAdapterPort].”

NT Event ID: 1293 (Hex)0xc435050D (cpqnimsg.dll)

Log Severity: Error (3)

Log Message: Redundancy has been reduced by the NIC in slot %1, port %2. Number of functional NICs in

the team: %3.

SNMP Trap: cpqNic3RedundancyReduced - 18014 in CPQNIC.MIB

Symptom: This trap is sent any time a physical adapter in a logical adapter group changes to the Failed

condition, but at least one physical adapter remains in the OK condition. This can be caused by loss of link

due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch

failures can also cause this condition.

User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the

adapter, Hub, or Switch may need replacement.

Supporting SNMP Trap Data:

• sysName

• cpqHoTrapFlags

• cpqNicIfPhysAdapterSlot

• cpqNicIfPhysAdapterPort

• cpqSiServerSystemId