8. Slide the 2.5-inch hard drive out of the drive adapter (2).
For instructions on installing a hard drive, see Installing a hard drive on page 38.
Installing a hard drive
●
Installing a 3.5-inch hard drive
●
Installing a 2.5-inch solid state drive (SSD), self-encrypting drive (SED), or solid state hybrid drive
(SSHD)
Installing a 3.5-inch hard drive
1. Slide the new 3.5-inch hard drive into the hard drive cage (1). Be sure that the hard drive
connector is facing up at the open end of the drive.
2. Screw the four mounting screws through the sides of the hard drive cage into the 3.5-inch hard
drive (2). Be sure to keep the blue rubber grommets behind each screw.
38 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
To Next Page
Loading...
