Antenna
The antennas route from the WLAN card to the top of the computer.
To remove the antenna:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the rear cover (see
Rear cover on page 30).
3. Disconnect the antennas from the WLAN module (1).
4. Remove the antenna cables from the clips built in the computer (2).
5. Peel the main transceiver (3) and the 2nd transceiver (4) to disengage the adhesive that secure
the transceivers to the computer.
To install the antenna, reverse the removal procedures.
Antenna
47
To Next Page
Loading...
