Ventilation
Fresh air ventilation is needed to maintain indoor comfort levels.
Ventilation should meet local Environmental Health and Safety (EHS) guidelines and regulations.
Ink handling
HP recommends that you wear protective gloves, protective clothing, and eye protection when handling
ink-system components.
Please check the Safety Data Sheets available at http://www.hp.com/go/msds before handling the ink.
Ink, and components contaminated by ink, should be disposed of according to local laws. Follow your
Environment Health and Safety processes and procedures. For further information, see the Safety Data
Sheets.
The robot can work with ethanol-based inks. When handling or storing these inks, keep them away from
sources of ignition, avoid high temperatures, and preferably store them in open locations.
Warnings and cautions
Symbols are used in this document to ensure the proper use of the robot and to prevent it from being
damaged. Follow the instructions marked with these symbols.
WARNING! Failure to follow the guidelines marked with this symbol could result in serious personal
injury or death.
CAUTION: Failure to follow the guidelines marked with this symbol could result in minor personal
injury or damage to the robot.
Warning labels
Safety labels are included on your robot. See the table to understand what the labels mean; they are
important.
Table 1-1
Warning labels
Label Explanation
Risk of personal injury due to impact if the robot falls from a
height.
Do not operate the robot on slopes of more than 4.4%
inclination.
Read the safety precautions in this guide and follow all
instructions before starting a job.
Read the documentation.
Read the safety precautions in this guide and follow all
instructions before starting a job.
Ventilation 7
To Next Page
Loading...
