HP SitePrint - Ink Supplies

Ink supplies7
HP SitePrint provides the broadest ink portfolio to execute construction building layout over any
material, with a choice of ink durability and a broad operating temperature range.
The ink portfolio consists of eight different ink SKUs with three different colors, and one cleaning
cartridge. Each cartridge contains 400 ml of ink and can print for more than 4 km (2.485 miles).
You can easily swap ink cartridges for a multi-color layout, although you need to clean the ink delivery
system when changing the ink type, to prevent ink mixing in the robot.
The operating temperature range is 0 to 40°C (32 to 104°F) for water-based inks, and −10 to 40°C (14 to
104°F) for solvent-based inks.
Based on ink composition and durability, we can distinguish four ink groups:
● Water-based permanent: At least 6 months durability, available in black, cyan, and magenta
● Water-based semi-permanent: 2–4 weeks durability, available in magenta and cyan
● Solvent-based permanent: At least 6 months durability, available in black
● Solvent-based semi-permanent: 2–4 weeks durability, available in blue and red
Water-based inks are recommended for most uses; solvent-based inks are recommended for printing on
waterproof materials or at temperatures below 0°C (32°F.)
Table 7-1
SitePrint inks
Ink type Permanence
Part
number
Name
Durability
1
Cleaning
2
Temperature
Dries over
waterproof
materials?
Water-
based
Permanent
7J3R0A
HP SitePrint 103 – Black WB
Permanent
6+ months Very slow
0 to 40°C (32
to 104°F)
No
7J3R1A
HP SitePrint 104 – Cyan WB
Permanent
6+ months Very slow
7J3R2A
HP SitePrint 105 – Magenta
WB Permanent
6+ months Very slow
Semi-
permanent
3
76Y80A
HP SitePrint 107 – Cyan WB
Semi-Permanent
4 weeks Medium
76Y81A
HP SitePrint 108 – Magenta
WB Semi-Permanent
6+ months Very slow
68 Chapter 7 Ink supplies