Robot specifications8
Here you can find the various specifications of your robot.
Battery-charger, battery, and robot power specifications
Power specifications of the robot, its battery, and its battery charger.
Table 8-1
Battery-charger, battery, and robot power specifications
Characteristic Specifications
Charger: Number of power cords 1
Charger: Input voltage 100–240 V (two wires and protective earth)
Charger: Input frequency 50–60 Hz
Charger: Maximum output voltage 17.4 Vdc
Battery: Nominal output voltage 14.4 Vdc
Battery: Nominal capacity 6.9 Ah, 99 Wh
Robot: Typical power consumption in operating mode 23 W
Robot: Power consumption in ready mode 17 W
Site voltage must be within the “Input voltage” range.
Sustainability specifications
You can find the up-to-date sustainability specifications of your robot at the HP website.
See http://www.hp.com/sustainability.
Environmental specifications
For successful operation, the robot should be kept within the specified range of environmental
conditions.
Using the robot outside the specified range may cause print-quality problems or damage electronic
components.
70
Chapter 8 Robot specifications
To Next Page
Loading...