This robot is not suitable for use in locations where children, or people not involved in the use of the
robot, are likely to be present.
WARNING! It is mandatory to have the appropriate technical training and experience necessary to be
aware of hazards to which you may be exposed in performing a task, and to take appropriate measures
to minimize the risks to yourself and to others. It is the responsibility of the robot owner or manager to
facilitate complete training of all possible robot users. Failing this requirement may result in personal
injury or damage to equipment.
Perform the recommended maintenance and cleaning tasks to ensure the correct and safe operation of
your robot.
Operations must be supervised at all times.
General safety guidelines
Please read these safety guidelines carefully.
There are no operator-serviceable parts inside the robot except those covered by HP’s Customer Self
Repair program: see http://www.hp.com/go/selfrepair. Refer servicing of other parts to qualified service
personnel.
Take these precautions before starting work:
● If the working area has access to a lower level (floors under construction above ground level, open
ramps, uncovered underground work areas, or stairwells), ensure that local safety rules are followed
to avoid the risk of falling people or objects. Ask your EHS site representative to confirm that the
site is safe before starting a job; if necessary, inspect the working area together with the EHS site
representative to avoid residual risks.
● Ensure that no people, machinery, or unnecessary objects are present in the working area.
● Check that during transportation and handling of the robot there is no appreciable damage,
deformation, or displacement of any component (sensors in particular) and that there are no ink
leaks. If you find any problem, do not start a job, and contact your service representative.
● This robot is provided with a safety function to avoid falling over. Disabling this function may result
in a hazardous operation. It is important to clean and maintain the sensors regularly, as described in
the robot maintenance instructions.
● Perform the required calibrations, verifications, maintenance, and cleaning tasks to ensure the
correct and safe operation of your robot.
● The robot contains sensitive electronic components. Check that the working area is not exposed to
strong electromagnetic fields, which can cause robot malfunction.
● Discharge yourself of static electricity each time before handling the robot in any way.
● Do not operate the robot with covers or doors open or wrongly assembled.
● Avoid operating the robot on windy days and over the enviromental specifications operative ranges
or locations.
2
Chapter 1 Introduction
To Next Page
Loading...
