NOTE: The illustration above shows disk removal in a StoreOnce appliance’s server unit.
The disk carrier is different when working with disks in an expansion shelf, as shown below.
5. Replace the failed disk with the new disk.
Push the hard drive assembly (1) into the drive bay until it stops and press the HDD carrier
latch (2) inward until it clicks.
Figure 14 Installing a replacement hard disk
NOTE: The illustration above shows disk installation in a StoreOnce appliance’s server
unit. The disk carrier is different when working with disks in an expansion shelf, as shown
below.
Figure 15 Installing a hard disk in an expansion shelf
38 Disk replacement
To Next Page
Loading...
Need help?
General
