10.
Remove the LCS radiator from the rear system fan assembly.
a.
Remove the screws that fasten the radiator to the rear system fan mounting plate as shown in
the following figure.
Figure 5-109 Removing the LCS radiator
b.
Separate the radiator from the rear system fan assembly as shown in the previous figure.
11.
Reinstall the CPU heatsinks (see
Installing the CPU heatsink on page 201).
12.
Reinstall the rear system fan assembly (see
Installing the rear system fan assembly on page 148).
13.
Reinstall all removed components and reconnect any cables that have been disconnected.
184 Chapter 5 Replacing components ENWW
To Next Page
Loading...
