●
Specify the Asset Tag or property identification number assigned by the company to this
workstation.
●
Enable power-on password prompts during system restarts (warm-starts) and power on.
●
Hide or show the integrated I/O functionality, including serial, USB, or parallel ports, audio, or
embedded NIC. Hidden devices are inaccessible, which increases system security.
●
Enable or disable removable media boot ability.
●
Enable or disable removable media write ability (if supported by hardware).
●
Replicate the workstation setup by saving system configuration information on CD or diskette and
restoring it on workstations.
●
Execute self-tests on specified SATA and SAS hard disk drives (if supported by the drive).
ENWW
The Computer Setup (F10) Utility
33
To Next Page
Loading...
