HPE 5510 HI Series

53
Item
HPE 5510 24G PoE+ 4SFP+ HI
HPE 5510 48G PoE+ 4SFP+ HI
× D)
(1.72 × 17.32 × 18.11 in)
(1.72 × 17.32 × 18.11 in)
Weight
≤ 10 kg (22.05 lb)
≤ 10 kg (22.05 lb)
Console ports
 1 × USB mini console port
 1 × serial console port
Only the USB mini console port is available when you connect both ports.
USB ports
1
1
Management
Ethernet ports
1
1
SFP+ ports
4
4
10/100/1000Base
-T autosensing
Ethernet ports
24
48
Interface card slots
1, on the rear panel
1, on the rear panel
Power supply slots
2, on the rear panel
2, on the rear panel
Fan tray
2, on the rear panel
2, on the rear panel
Input voltage
 PSR720-56A AC-input
 Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
 Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
 PSR1110-56A AC-input
 Rated voltage range: 115 VAC to 240 VAC @ 50 Hz or 60 Hz
 Max voltage range: 102.5 VAC to 264 VAC @ 47 Hz to 63 Hz
PoE power capacity
Depends on the power supply configurations. For more information, see the following
table.
Minimum power
consumption
67 W
75 W
Maximum power
consumption
(including PoE
power consumption)
1000 W
1800 W
Chassis leakage
current compliance
UL60950-1, EN60950-1, IEC60950-1, GB4943
Melting current of
power supply fuse
15 A, 250V
Operating
temperature
0°C to 45°C (32°F to 113°F)
Relative humidity
5% to 95%, noncondensing
Fire resistance
compliance
UL60950-1, EN60950-1, IEC60950-1, GB4943
The following table describes PoE power capacity for the HPE 5510 24G PoE+ 4SFP+ HI and HPE 5510
48G PoE+ 4SFP+ HI switches: