51 PCIe card slot 1Controller release lever
2 6Controller release lever catch PCIe card slot 2
73 PCIe card slot 3Thumbscrew - PCIe cage release
4 Thumbscrew - PCIe card release
3. Remove the PCIe cage.
a) Loosen the bottom thumbscrew on the PCIe cage.
Important:
For HPE Alletra 5010 or Nimble Storage AF20 and HF20 models, you must also remove the controller shroud.
31 Controller release leverController shroud
2 PCIe cage
b) For HPE Alletra 5010 or Nimble Storage AF20 and HF20 models: Grasp both sides of the PCIe cage and lift the
cage out of the controller, making sure that the cage clears the guide pins and that both riser cards and the bridge
board connector are properly unseated.
Upgrade Procedures 117
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
