HPE ProLiant DL380 Gen10 - Page 13

LFF power switch module LEDs and button
Item Description Status
1 UID button/LED* Solid blue = Activated
Flashing blue:
• 1 Hz/cycle per sec = Remote management or firmware
upgrade in progress
• 4 Hz/cycle per sec = iLO manual reboot sequence initiated
• 8 Hz/cycle per sec = iLO manual reboot sequence in
progress
O = Deactivated
2 NIC status LED* Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
O = No network activity
3 Health LED* Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical**
4 Power On/Standby button and
system power LED*
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
Solid amber = System in standby
O = No power present†
Component identification 13