HPE ProLiant DL385 Gen10 - DIMM-Processor Compatibility

• Primary or secondary PCIe riser cage
(Removing and replacing the primary or secondary PCIe riser cages)
• Tertiary PCIe riser cage
(
Removing and replacing the tertiary PCIe riser cage)
8. If the accelerator has an auxiliary power cable, disconnect the cable from the accelerator.
9. Remove the accelerator from the riser cage:
• Primary or secondary riser cage
• Tertiary riser cage
To replace the component, reverse the removal procedure.
DIMM-processor compatibility
The installed processor determines the type of DIMM that is supported in the server:
Removal and replacement procedures
79