• If you will use a file, select Media File, and then click Browse and navigate to the file you want to use.
• If you will use physical media, select Media Drive, and then select the drive letter of the floppy disk, USB key, or CD in
the Media Drive menu.
6. Enter the path and file name for the image file in the Image File text box.
7. Click Create.
iLO notifies you when the image creation is complete.
8. Click Close.
9. Confirm that the image was created in the specified location.
Copying data from an image file to a physical disk (Java IRC)
The Create Media Image feature enables you to copy the data from a disk image file to a floppy disk or USB key. Only disk
image (IMG) files are supported. Copying data to a CD is not supported.
You can copy disk image data to a floppy disk or USB key.
Prerequisites
• Remote Console privilege
• A license that supports this feature is installed. For information about the available license types and the features they
support, see the licensing documentation at the following website: http://www.hpe.com/support/ilo-docs.
• The Remote Console feature is enabled on the Access Settings page.
• The Virtual Media feature is enabled on the Access Settings page.
Procedure
1.
Click Remote Console & Media in the navigation tree.
The Launch tab displays the remote console launch options.
2.
Start the Java IRC.
3.
Select Virtual Drives > Create Disk Image.
The Create Media Image dialog box opens.
4.
In the Create Media Image window, click Disk>>Image.
The Create Media Image changes to the Image>>Disk option.
5. Select the drive letter of the floppy disk or USB key in the Media Drive menu.
6. Enter the path and file name for the existing image file in the Image File text box.
iLO notifies you when the operation is complete.
7. Click Close.
8. Confirm that the files were copied to the specified location.
120 Using HPE iLO 5
To Next Page
Loading...
