HPE ProLiant e910

Table 3: Extended Edgeline specifications
Specification Value
Temperature range
1
—
Operating 0°C to 55°C (32°F to 131°F)
Nonoperating -30°C to 60°C (-22°F to 140°F)
Relative humidity (noncondensing)
—
Operating 8% to 90% at 28°C (824°F) maximum wet bulb temperature
Non-Operating 5% to 95% at 387°C (1017°F) maximum wet bulb
temperature
1
All temperature ratings shown are for sea level. An altitude derating of
10°C per 305 m (18°F per 1000 ft) to 3048 m (10000 ft) is
applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). No restrictions on product configurations
except for rotating hard drives. PCI cards must be rated for continuous operation with 60°C cooling air. Solid-state drives must be rated for
continuous operation with 65°C cooling air. Not rated for operation over 3030 m (10000 ft).
Mechanical specifications
Specification
Value
Height 1671 cm (657 in)
Depth 198 cm (078 in)
Width 1837 cm (723 in)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• 1500W Hot Plug Power Supply
• 1500W -48VDC Hot Plug Power Supply
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website (
http://
www.hpe.com/info/proliant/powersupply).
1500W Hot-plug Power Supply
Specification
Value
Input requirements
—
Rated input voltage
90 VAC to 264 VAC
Table Continued
174 Specifications