HPE ProLiant e910

• Input Voltage Lost
• Fan Failure
• High Input A/C Warning
• Low Input A/C Warning
• High Output Warning
• Low Output Warning
• Inlet Temperature Warning
• Internal Temperature Warning
• High Vaux Warning
• Low Vaux Warning
• Mismatched Power Supplies
Capacity
The capacity of the power supply (watts).
Firmware
The installed power supply firmware.
PDS
Whether the installed power supply is enabled for Power Discovery Services.
Power Discovery Services is an enhancement to the iPDU technology. If the chassis power supply is connected to an iPDU,
additional information is displayed in the Intelligent Power Distribution Units section.
Hotplug
Whether the power supply bay supports swapping the power supply when the chassis is powered on. If the value is Yes,
and the power supplies are redundant, the power supply can be removed or replaced when the chassis is powered on.
Model
The power supply model number.
Spare
The spare power supply part number.
Serial Number
The power supply serial number.
Using HPE iLO 5 129