HPE ProLiant e910 - Page 84

The equivalent UTC value is displayed above the date and time you entered.
If you enter a To date and time that occurs before the start time of an existing task in the queue, iLO prompts you to enter
a dierent value. The installation queue is a "first-in, first-out" list of tasks, and you cannot create a maintenance window
that will expire before an existing task will run.
6. Click OK.
The maintenance window is updated.
Removing a maintenance window
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click Maintenance Windows.
2.
Click
next to the maintenance window you want to remove.
iLO prompts you to confirm that you want to remove the maintenance window.
3.
Click Yes, remove.
The maintenance window is removed.
All tasks associated with the removed maintenance window are canceled.
Removing all maintenance windows
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Click Firmware & OS Software in the navigation tree, and then click Maintenance Windows.
2.
Click Remove all.
iLO prompts you to confirm that you want to remove all maintenance windows.
3.
Click Yes, remove all.
The maintenance windows are removed.
All tasks associated with the removed maintenance windows are canceled.
Viewing maintenance windows
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click Maintenance Windows.
2. (Optional) To sort by a table column, click the column heading.
84 Using HPE iLO 5