To Next PageTo Next Page
Need help?Do you have a question about the HPE R/T3000 G2 and is the answer not in the manual?
General| Power Capacity | 3000 VA |
|---|---|
| Battery Type | Sealed Lead-Acid (SLA) |
| Output Power Capacity | 2700 Watts |
| Rack Height | 2U |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Efficiency | Up to 95% |
| Operating Humidity | 0 to 95% non-condensing |
| Form Factor | Rack/Tower |
| Interface | USB, Serial |
| Product Type | UPS |
| Battery Runtime | Varies by load |
| Transfer Time | 4-6 ms |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Warranty | 3 years |
| Nominal Output Voltage | 120 V, 208 V, 230 V |
| Noise Level | 40-50 dB |
Details the UPS model, its features, and components on the front panel, including controls and indicators.
Describes different UPS models and illustrates their rear panel layouts and connectors.
Illustrates the rear panel connections for the REPO port and the ERM unit.
Covers essential safety warnings, tools, materials, and initial steps before hardware installation.
Guides on selecting a site, installing mounting rails, and mounting the UPS and ERM in a rack.
Details connecting battery leads, host computer, REPO port, ground, utility power, and devices.
Instructions for converting the UPS/ERM to a tower configuration and installing accessories like extension bars.
Explains the different operational states of the UPS, such as Standby, Operate, and Battery modes.
Describes how to use the UPS front panel buttons and configure system parameters.
Covers initiating self-tests, silencing alarms, and the procedure for safely powering down the UPS.
Provides guidance on battery safety, care, determining replacement needs, and the replacement procedure.
Details replacing UPS, ERM, option cards, and updating UPS firmware.
Instructions for configuring USB to serial converters and reassigning COM ports.
A table correlating LED status with UPS conditions and potential causes.
Explains conditions leading to Auto-Bypass, Converter Off modes, and general alarm states.
Addresses issues like battery problems, voltage fluctuations, overloads, and startup failures.
Lists physical dimensions, weight, input/output voltage, current ratings, and power protection details.
Details battery types, charging, runtimes, and environmental operating conditions.
Information on ordering spare parts, lists of UPS and ERM spare parts, and hardware options.
Guidance on contacting HPE support, accessing software updates, and useful web resources.
Information about the Customer Self Repair program for replacing parts.
Details on how to use remote support for device diagnostics and event notifications.
Information on warranty terms, safety compliance, and regulatory declarations like RoHS.
