HPE R/T3000 G2 User Manual

Specifications 62
High-voltage UPS battery runtimes
Load, percent Estimated battery
runtime
Runtime with one ERM Runtime with two ERMs
20
40 minutes
125 minutes
225 minutes
50
12 minutes
50 minutes
89 minutes
80
6 minutes
30 minutes
54 minutes
100
4 minutes
24 minutes
43 minutes
Low-voltage UPS battery runtimes
Load, percent Estimated battery
runtime
Runtime with one ERM Runtime with two ERMs
20
45 minutes
142 minutes
256 minutes
50
15.5 minutes
55 minutes
99 minutes
80
7 minutes
34 minutes
60 minutes
100
5 minutes
26 minutes
47 minutes
Environmental specifications
Feature Specification
Operating temperature
10°C to 40°C (50°F to 104°F); UL-tested at 25°C
(77°F)
Nonoperating
temperature
-15°C to 40°C (-5°F to 104°F)
Relative humidity
20% to 80%; noncondensing
Operating altitude
Up to 3,000 m (9,842 ft) above sea level
Nonoperating altitude
15,000 m (49,212 ft) above sea level
Audible noise
Less than 45 dBA, normal operation
Less than 50 dBA, on battery power
REPO port specifications
The REPO port meets the requirements of NFPA 70 and NEC Articles 645-10 and 645-11 for a
Disconnecting Means.

HPE R/T3000 G2 Specifications

General

Power Capacity	3000 VA
Battery Type	Sealed Lead-Acid (SLA)
Output Power Capacity	2700 Watts
Rack Height	2U
Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Efficiency	Up to 95%
Operating Humidity	0 to 95% non-condensing
Form Factor	Rack/Tower
Interface	USB, Serial
Product Type	UPS
Battery Runtime	Varies by load
Transfer Time	4-6 ms
Operating Temperature	0 to 40°C (32 to 104°F)
Warranty	3 years
Nominal Output Voltage	120 V, 208 V, 230 V
Noise Level	40-50 dB