HPE R/T3000 G2 User Manual

Installation 15
3.
Install cage nuts or clip nuts into the rear of the rack.
4. Insert screws through the mounting rail into the cage nuts or clip nuts.

HPE R/T3000 G2 Specifications

General

Power Capacity	3000 VA
Battery Type	Sealed Lead-Acid (SLA)
Output Power Capacity	2700 Watts
Rack Height	2U
Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Efficiency	Up to 95%
Operating Humidity	0 to 95% non-condensing
Form Factor	Rack/Tower
Interface	USB, Serial
Product Type	UPS
Battery Runtime	Varies by load
Transfer Time	4-6 ms
Operating Temperature	0 to 40°C (32 to 104°F)
Warranty	3 years
Nominal Output Voltage	120 V, 208 V, 230 V
Noise Level	40-50 dB