HPE XP7

Screen elements Description
Status Displays all statuses by default.
Pool Name Displays all the pools assigned for the selected array.
Master pane details
Status icon The status of a ThP or Pool record is computed based on the
Pools Average Read Response Time and Pool Average Write
Response Time metrics.
Pool ID Displays the pool number.
Pool Type Displays how the pool is being used. For Thin Provisioning, THP
appears. For Smart Pools: Smart appears.
NOTE: Real time tier enabled Smart pool is displayed as
Smart (Real time tier).
Pool Status Displays the pool status.
• Normal: The pool is in a normal status.
• Over threshold: The used capacity of the pool exceeds the
pool threshold value that you have set for the pool metrics.
• Blocked: The pool is full, or an error occurred in the pool,
therefore the pool is blocked.
• Failure: The Smart or the ThP pool is in a failed state.
The VVols performance data, the respective RAID Groups,
and the pool LDEVs utilization data is not displayed for such
pools.
Savings%(FMD Gen2/Comp/Dedup) Displays the savings (%), deduplication, and compression ratio
for the V05+1 feature in FMD Gen2 drives.
Average Read/Write Response Time Displays the average of average read response time and
average write response time of the Pool Virtual Volumes.
Detail pane > Chart View: Metrics
Default metric
Yes/No
Pool Utilization Yes
Frontend Vs Backend Hit Ratio No
Total IO - Frontend
Yes
Total Random IO - Frontend No
Table Continued
242 Thin Provisioning and Smart Pools