HPE XP7

Screen components Description
Avg Host Port IO Displays the average host port assigned per I/O based on the
selected volume type (S-VOL or P-VOL).
Avg Host Port MB Displays the average host port assigned per MB based on the
selected volume type (S-VOL or P-VOL)
CLPR Usage % Displays the total percentage of CLPR data usage that is
configured for the selected volume type (S-VOL or P-VOL)
Write Pending % Displays the percentage of data pending to be written on an
LDEV from the CLPR that is configured for the selected volume
type (S-VOL or P-VOL)
Side File % Displays the utilization of the side file shown as a percentage for
a CLPR that is configured for the selected volume based on the
volume type (S-VOL or P-VOL)
MP Blade Util % Displays the average utilization of the MP Blade that is
configured for the selected volume based on the volume type (S-
VOL or P-VOL)The MP Blade average utilization data is
collected during the DKC performance data collection. The
collection frequency set for the DKC data collection might be
different from that set for the LDEV data collection.
RG Util % Displays the total utilization of each RAID Group which is
configured for the volume based on the volume type (S-VOL or
P-VOL).
Port Performance Data
Screen components Description
CA-Port Displays the port assigned for the continuous access activity
Attribute Displays the type of the port, such as the Fibre (Cont Acc
Initiator), or Fibre (Ext-Lun Initiator)
Avg IO Displays the average I/O rate
Avg MB Displays the average throughput
Performance Summary
Screen components Description
DKC Displays the storage array serial number
DKC Time Displays the average DKC time
RG Time Displays the average RG time
Table Continued
Virtual Storage Machine 257