HPE XP7 - Page 267

Report
types
Description For XP disk arrays For P9500/XP7 disk
arrays
ThP Pool
Occupancy
The ThP Pool Occupancy report provides
data on the utilization percentage of the
eight busiest ThP pools. It also includes
pool performance metrics such as:
• Frontend IO per second
• Frontend MB per second
• Backend tracks
• Average read response time
• Average write response time
• Max read response time
• Max write response time
Yes Yes
MP Blade
Utilization
The MP Blade Utilization report provides
data on the average utilization of each
installed MP blade. In addition, the
following are also included in the report for
each MP blade:
• The top 20 consumers (LDEVs,
continuous access journal groups, or E-
LUNs) and their average utilization of
the CPU cycles.
• The average MP blade utilization by
each processing type.
So, if there are four MP blades, the MP
Blade Utilization report displays the
utilization data and related charts in the
following order:
1. Average utilization data for the first MP
blade.
2. Average utilization by top 20 consumers
for the first MP blade.
3. Average utilization by the processing
types for the first MP blade.
The above-mentioned sequence is
repeated for the subsequent MP blades.
No Yes
Table Continued
Reports 267