HPE XP7

Report
types
Description For XP disk arrays For P9500/XP7 disk
arrays
Front End
Port
Utilization
The frontend port utilization comprises of
the following reports:
• Maximum Port IO
• Minimum Port IO
• Average Port IO
• Average Port MB
• Maximum Port MB
• Minimum Port MB
Yes Yes
All The All report consolidates and provides
the above-mentioned reports in a single
report for the selected date and time range:
IMPORTANT:
The LDEV Activity report is not
included in the All report.
Yes
NOTE: The MP
Blade utilization data
is not applicable for
the XP disk arrays.
So, the MP Blade
Utilization report is
not included in the
All report generated
for the XP disk
arrays.
Yes
NOTE: The
ACP/DKA and
the CHIP/CHA
utilization data
are not
applicable for
the XP7 disk
arrays. So, their
reports are not
included in the
All report
generated for
the XP7 disk
arrays.
To view sample reports for the above-mentioned report types, see Sample reports.
IMPORTANT:
• Reports on the following are available only if they are configured in the selected XP or XP7 disk
array. If not configured, they are not even displayed as options to select for create their reports.
In addition, they are also not displayed in other related reports, like the Array Performance and
the All reports.
◦ Journal Pool Utilization
◦ ThP Pool Occupancy
◦ Snapshot Pool Occupancy
• In the report that you create, PA plots the data for a maximum of eight components in each chart
that is displayed in the report. For example, if you want to view the LDEV IO report for the 64
busiest LDEVs, PA provides a single report that includes eight charts. Each chart accommodates
data for a maximum of eight LDEVs.
Reports 269