HPE XP7 - Page 345

Metric
category
Metric Description
RAID Group Utilization
Random Write Parity
The utilization of the RAID Group
for writing random parity.
RAID Group Utilization
Seq Reads
The utilization of the RAID Group
for sequential reads.
RAID Group Utilization
Seq Writes
The utilization of the RAID Group
for sequential writes.
RAID Group Utilization
Seq Write Parity
The utilization of the RAID Group
for writing sequential parity.
Cache Usage Util The utilization of the cache shown
as a percentage value.
Cache Usage Utilization,
Cache Writes Pending
Utilization, Cache
Sidefile Usage
Utilization.
Cache Writes Pending
Util
The utilization of the cache write
pending shown as a percentage
value.
Cache Sidefile Usage
Util
The utilization of the sidefile shown
as a percentage value.
CLPR MPB Writes
Pending Util
CLPR write pending usage per
MPB shown as a percentage value.
CLPR MPB Usage Util CLPR usage per MPB shown as a
percentage value.
THP Pool Occupancy The utilization of the ThP pool
shown as a percentage value.
The usage rate of a ThP
pool. The ThP pool
occupancy is displayed
only for an XP24000
type array.
SNAPSHOT Pool
Occupancy
The utilization of the snapshot pool
shown as a percentage value.
The usage rate of a
snapshot pool. The
snapshot pool
occupancy is displayed
for the XP12000 and
later type arrays.
Journal File Usage Util The utilization of the journal file
usage shown as a percentage
value.
The usage rate of a
continuous access
journal file.
Average MP Blade Util The average utilization is
calculated as the utilization of all
the individual processors in an MP
blade over an entire collection
interval.
Applicable for only
P9500 disk arrays.
Table Continued
Metric Category, metrics, and descriptions 345