HTC Sweden AB
Professional Floor Systems
Service & Maintenance – Diesel engine
EVERY 500 hours
• Test and refill cooling fluid in
motor
• Air filter exchange
• Control ground cable on motor,
clean if necessary
• Change oil and oil filter
• Change water separator for fuel
system
• Change fuel filters
• Check hoses and clamps
• Clean cooler
EVERY 1000 hours
1. Control tappet clearance, adjust
EVERY 2000 hours
1. Control after cooler package
2. Generator control
3. Control motor bracket
4. Control start motor
5. Control turbo
6. Control water pump
EVERY 2nd year
1. Change cooling fluid
2. Cleaning & testing after cooler
(4000 hrs)
To Next Page
Loading...
