HTC 2500 iX - Page 143

SEBU7833-03 17
Product Information Section
Model Views
g00984281
Illustration 15
A typical example o f the layout of the valves
(A) Inlet valv es
(B) Exhaust v alves
Table 1
1104 Industrial Engine Specifications
Number of Cylinders
4 In-Line
Bore
105 mm (4.134 inch)
Stroke 127 mm (5.0 inch)
Aspiration
Turbocharged aftercooled
Tu rbocharged
Naturally aspirated
Compression Ratio
NA 19.25:1 NA
T 18.23:1 T, TA
Displacement
4.4 L (268 in
3
)
Firing Order
1342
Rotation (flywheel end) Counterclockwise
Valve Lash Setting (Inlet) 0.20 mm (0.008 inch)
Valve Lash Setting
(Exhaust)
0.45 mm (0.0
18 inch)
Table 2
1103 Industrial Engine Specifications
Number of Cylinders 3 In-Line
Bore 105 mm (4.134 inch)
Stroke 127 mm (5.0 inc
h)
Aspiration Turbocharged
Naturally aspirated
Compression Ratio NA 19.25:1
T 18.25:1
Displacement
3.3L(201in
3
)
Firing Order
123
Rotation (flywheel end) Counterclockwise
Valve Lash Setting (Inlet) 0.20 mm (0.008 inch)
Valve Lash Setting
(Exhaust)
0.45 mm (0.018 inch)
Table 3
1104 Genset Specifications
Number of Cylinders
4 In-Line
Bore
105 mm (4.134 inch)
Stroke 127 mm (5.0 inch)
Aspiration
Turbocharged aftercooled
Turbocharged
Naturally aspirated
Compression Ratios
NA 19.25:1
T 17.25:1, T 18.23:1,
TA 18.23:1
Displacement
4.4L(268in
3
)
Firing Order
1342
Rotation (flywheel end) Counterclockwise
Valve Lash Setting (Inlet) 0.20 mm (0.008 inch)
Valve Lash Setting
(Exhaust)
0.45 mm (0.018 inch)
This document is printed from SPI². Not for Resale.