22 SEBU7833-03
Product Information Section
Product Identification Information
Label for engines that c omply wi t h
MSHA emissions
g01381316
Illustration 19
Typical example
The label th
at is shown in illustration 19 is for engines
that operate in underground coal mines in North
America. The label is installed on engines that comply
with the Min
e Safety and Health Administration
(MSHA) emissions. Approved diesel engines shall
be identified by an approved mark that is legible
and perman
ent. The approved mark is scribed with
the approved MSHA number. The label should be
securely attached to the diesel engine.
Label for engines t hat do not
comply with emissions
g01156734
Illustration 20
This typical examp le of a label is installed on engines that do not comply with emissions.
This document is printed from SPI². Not for Resale.
To Next Page
Loading...
