EasyManua.ls Logo

HTC 2500 iX - Page 60

HTC 2500 iX
391 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Felkoder i kontrollpanel
Frekvensomriktare: Felkod 57 - 70
Felkod: Visas i display: Förklaring:
57 [Torque time-out]
(SrF)
Torque control function time-out.
58 [Out. contact. stuck]
(FCF1)
The output contactor remains closed although the opening conditions have been met.
59 [Out. contact. open.]
(FCF2)
The output contactor remains open although the closing conditions have been met.
60 [Internal-time meas.]
(InFC)
Fault on the electronic time measurement component.
61 [AI2 input]
(AI2F)
Non-conforming signal on analog input AI2.
62 [Encoder]
(EnF)
Encoder feedback fault.
63 [Thyr. soft charge]
(CrF2)
DC bus charging fault (thyristors).
64 [input contactor]
(LCF)
The drive is not turned on even though [Mains V. time out] (LCt) has elapsed.
65 [DB unit sh. circuit]
(bUF)
Short-circuit output from braking unit.
66 Reserved
67 [IGBT desaturation]
(HdF)
Short-circuit or grounding at the drive output.
68 [Internal-option]
(InF6)
The option installed in the drive is not recognised.
69 [internal- CPU]
(InFE)
Internal microprocessor fault.
70 [DBR overload]
(bOF)
The braking resistor is under excessive stress.

Table of Contents

Related product manuals